bernette Funlock 48

An affordable overlocker/coverstitch machine with a wide range of features and impressive stitch quality

The bernette 48 is the top model of the Funlock series and is a combination of an overlocker and a coverstitch machine. It has a total of 23 stitches: 15 overlock stitches, 3 coverstitches, 4 combo stitches and 1 chain stitch, overlock stitches with a stitch width of up to 7 mm, coverstitches with stitch widths of 2.8 or 5.6 mm and combo stitches with a stitch width of up to 10 mm. Colour-coded thread paths make threading easier and in the needle area, a manual threader helps to threading the needles. The lower looper and chain looper have a mechanical threader. The knife is operated from below, which not only ensures a cleanly cut edge, but also safe handling, and it can be adjusted comfortably with one hand. The bright LED light provides a well-lit sewing and threading area. The bernette Funlock 48 has a sewing speed of up to 1300 stitches per minute.

• 2, 3, 4 and 5-thread seams
• Wide overlock stitches: 3-7 mm
• Wide coverstitches: 2.8 / 5.6 mm
• Wide combo stitches: up to 10 mm
• Wide roll hem stitches: 1.5 mm
• Large working area to the right of the needles: 87mm
• Bright LED light
• Sewing speed up to 1300 stitches/minute
• Differential feed infinitely adjustable while sewing
• Easy threading due to the colour-coded threading paths
• Manual needle threader
• Accessories in the looper cover
• Including waste collector

Features

Contents

• Standard presser foot Overlock/Cover
• Screw driver (large size)
• Oiler
• Spool net (5x)
• Spare upper knife (stationary)
• Spool cap (5x)
• Brush
• Needle set (ELx705)
• Needle Threader / inserter
• Allen Screw driver (small)
• Tweezers
• Upper looper converter (ULC)
• Spool stabilizer (5x)
• Dust cover
• Cut-offs Bin
• Cover/Chainstitch Inserter